I. TEXTILES AND CLOTHING - PHYSICAL AND PHYSICOCHEMICAL TESTS
1.3. Nonwoven textile materials (from natural, synthetic fibers and blends with them, articles made from them used for living, technical purposes and garment)
| 1.3.1 Quantitative analysis : | RLNTP**:2006 Appendix №5, section II; |
| - acetate/ some other fibres | Method1 (with acetone) |
| - some protein/ some other fibres | Method 2 (with hypochlorite) |
| - viscose, cupro, some modal/ some other fibres | Method 3 (with formic acid and zinc chloride) |
| - polyamide, nylon/ some other fibres | Method 4 (with formic acid) |
| - acetate/ some other fibres | Method 5 (with benzyl alcohol) |
| - triacetate/ some other fibres or polylactide | Method 6 (with dichloromethane) |
| - some cellulose fibres/ some other fibres | Method 7 (with sulphuric acid) |
| - acrylics, some modacrylics, some chlorofibres/ some other fibres | Method 8 (with dimethylformamide) |
| - acetate/ some other fibres | Method 10 (with acetic acid) |
| - silk/ some other fibres | Method 11 (with sulphuric acid) |
| - chlorofibres/ some other fibres | Method 14 ( with concentrated sulfuric acid) |
| RLNTP**:2006 Appendix №6; Methods based on Annex №5, section II | |
| - acetate/ some other fibres | BDS EN ISO 1833-3 (with acetone) |
| - protein/ some other fibres | BDS EN ISO 1833-4(with hypochlorite) |
| - viscose, cupro, some modal or lyocell / some other fibres | BDS EN ISO 1833-6(with formic acid and zinc chloride) |
| - polyamide fibres/ some other fibres | BDS EN ISO 1833-7(with formic acid) |
| - acetate/ triacetate fibres | BDS EN ISO 1833-8 (with acetone) |
| - triacetate or polylactide fibres/ some other fibres | BDS EN ISO 1833-10(with dichloromethane) |
| - cellulose fibres/ some other fibres | BDS EN ISO 1833-11 (with sulphuric acid) |
| - acrylics, modacrylics, chlorofibres, elastane/ some other fibres | BDS EN ISO 1833-12 (with dimethylformamide) |
| - acetate fibres/ some other fibres | BDS EN ISO 1833-14 (with acetic acid) |
| - silk/ some other protein fibres | BDS EN ISO 1833-18(with sulphuric acid) |
| - chlorofibres/ some other fibres | BDS EN ISO 1833-17 (with sulphuric acid) |
| - three- component fibre mixtures | BDS EN ISO 1833-2 |
| - manual separation of fibres of different types | BDS EN ISO 1833-1 |
| Regulation (EU) No 1007 Annex VIII, Chapter 2 | |
| - acetate/ some other fibres | Method 1 (with acetone) |
| - some protein/ some other fibres | Method 2 (with hypochlorite) |
| - viscose, cupro, some modal / some other fibres | Method 3 (with formic acid and zinc chloride) |
| - polyamide, nylon/ some other fibres | Method 4 (with formic acid) |
| - acetate/ some other fibres | Method 5 (with benzyl alcohol) |
| - triacetate or polylactide/ some other fibres | Method 6 (with dichloromethane) |
| - some cellulose fibres/ some other fibres | Method 7 (with sulphuric acid) |
| - acrylics, some modacrylics, some chlorofibres/ some other fibres | Method 8 (with dimethylformamide) |
| - acetate/ some other fibres | Method 10 (with acetic acid) |
| - silk/ some other fibres | Method 11 (with sulphuric acid) |
| - certain fibres and chlorofibres, elastolefin or melamine/ some other fibres | Method 14 ( with concentrated sulfuric acid) |
| - manual separation | |
| - three- component fibre mixtures | Regulation (EU) No 1007 Annex VIII, Chapter 3 |
|
1.3.2 Hygroscopicity |
BDS 12006 |
|
1.3.3 pH of aqueous extract |
BDS EN ISO 3071 |
| 1.3.4 Dimension change after wetting ( floor coverings) – length/width. |
BDS 12823 |
|
1.3.5 Free and hydrolysed formaldehyde (water extraction method) |
BDS EN ISO 14184-1 |
| 1.3.6 Released formaldehyde (vapour absorption method) | BDS EN ISO 14184-2 |
| 1.3.7 Maximum force to seam rupture using the strip method |
BDS EN ISO 13935-1 |
| 1.3.8 Strength to ball puncturing |
BDS 9585 |
|
1.3.9 Length 1.3.10 Width |
BDS EN 1773 |
| 1.3.11 Mass per unit area | BDS EN 12127 |
|
1.3.12 Total mass per unit area (coated fabrics) |
BDS EN ISO 2286-2; method А |
| 1.3.13 Mass per unit area (nonwovens) | BDS EN 29073-1 |
|
1.3.14 Ignition time оf vеrtiсаllу оriеntеd sресimеns - surfасе/ bоttоm ignitiоn – lеngth and/or width: |
BDS EN 1101+А1 |
|
1.3.15 Вurning bеhаviоur. Flаmе sрrеаd timе оf vеrtiсаllу оriеntеd sресimеns - surfасе/ bоttоm ignitiоn- lеngth and/or width (first аnd third mаrkеr thrеаd) |
BDS EN 1102 |
| 1.3.17 Speed spread time of vertically oriented specimens - surface/ bottom ignition -length/width |
BDS EN 1102 |
| 1.3.18.1 Flаmе sрrеаd timе оf vеrtiсаllу оriеntеd sресimеns - surfасе/ bоttоm ignitiоn- lеngth and/or width (first аnd third mаrkеr thrеаd) 1.3.18.2 Flаming dеbris оf vеrtiсаllу оriеntеd sресimеns - surfасе/ bоttоm ignitiоn- lеngth and/or width |
BDS EN 1103 |
|
1.3.19 Ignition time оf vеrtiсаllу оriеntеd sресimеns- surfасе/ bоttоm ignitiоn - lеngth and/or width: |
BDS EN 1625 |
| 1.3.20 Average ignition time оf vеrtiсаllу оriеntеd sресimеns - surfасе/ bоttоm ignitiоn - lеngth and/or width | BDS EN ISO 6940 |
|
1.3.21 Flаmе sрrеаd рrореrtiеs оf vеrtiсаllу оriеntеd sресimеns - surfасе/ bоttоm ignitiоn - lеngth and/or width (first, sесоnd, third mаrkеr thrеаd) |
BDS EN ISO 6941 |
|
1.3.22 Теаr fоrсе оf trоusеr-shареd tеst sресimеn - lеngth/width |
BDS EN ISO 13937-2 |
| 1.3.23 Теаr fоrсе оf tоnguе-shареd tеst sресimеn - lеngth/width | BDS EN ISO 13937-4 |
| 1.3.24 Air permeability | BDS EN ISO 9237 |
|
1.3.25 Water-repellence by the Bundesmann rain shower test |
BDS EN 29865 |
| 1.3.28 Textiles; resistance to surface wetting (spray test) | BDS EN ISO 4920 |
| 1.3.29 Surface fuzzing and pilling | BDS EN ISO 12945-1 BDS EN ISO 12945-2 |
| 1.3.30 Abrasion resistance -Martindale method. Specimen breakdown |
BDS EN ISO 12947-2 |
| 1.3.31 Abrasion resistance - Martindale method . Mass loss reduction |
BDS EN ISO 12947-3 |
| 1.3.32 Abrasion resistance -Martindale method. Appearance change |
BDS EN ISO 12947-4 |
|
1.3.33 Thermal resistance under steady-state conditions , Rct 1.3.34 Water-vapour resistance under steady-state conditions , Ret |
BDS EN ISO 11092 |
|
1.3.35.1 Flame resistance time of vertically oriented specimens (surface/ bottom ignition) - length and/or width |
BDS EN ISO 15025 |
|
1.3.36.1 Dimensional changes after wet treatment with automatic washing machine - length / width |
BDS 9425, amendments 1, 2 and 3 |
| 1.3.36.2 Dimensional changes after wet treatment by hand washing - length / width | BDS 9425- table 2, wet treatment mode P2 and P3 |
|
1.3.37 Materials soluble in organic solvents, natural, resulting from the production of synthetic fibres or applied during the processing stage |
DIN 54278-1 |
| 1.3.38 Dimensions of clothing | BDS EN ISO 8559-1 BDS EN ISO 8559-2 BDS EN 13402-3 |
| 1.3.39. Surface resistivity |
BDS EN 1149-1 |
| 1.3.40. Electrical resistance through a material (vertical resistance),Rv |
BDS EN 1149-2 |
| 1.3.41 Resistance to water penetration |
BDS EN ISO 811 |
| 1.3.42 Tear force using ballistic pendulum method (Elmendorf) – length / width |
BDS EN ISO 13937-1/AC |
| 1.3.43 Tear resistance of coated fabrics – at constant rate length / width |
BDS EN ISO 4674-1 method A, |
| 1.3.44 Tear resistance of coated fabrics – ballistic pendulum method length and/or width |
BDS EN ISO 4674-2 |
| 1.3.45 Tensile strength at break of coated fabrics – length / width |
BDS EN ISO 1421 method 1 |
| 1.3.46 Elongation at break of coated fabrics – length / width |
BDS EN ISO 1421 method 1 |
| 1.3.47 Abrasion resistance |
BDS EN 530 |
| 1.3.48 Appearance of finished textiles after home washing and drying |
BDS EN ISO 15487 - T.7.4; 7.5; 7.6; 7.8; 7.9 |