I. TEXTILES AND CLOTHING - PHYSICAL AND PHYSICOCHEMICAL TESTS
1.2. Knitted fabrics (from natural, synthetic fabrics and blends with them, articles made from them used for living, technical purposes and garment)
| 1.2.1 Quantitative analysis : | RLNTP**:2006 Appendix №5, section II; |
| - acetate/ some other fibres | Method1 (with acetone) |
| - some protein/ some other fibres | Method 2 (with hypochlorite) |
| - viscose, cupro, some modal/ some other fibres | Method 3 (with formic acid and zinc chloride) |
| - polyamide, nylon/ some other fibres | Method 4 (with formic acid) |
| - acetate/ some other fibres | Method 5 (with benzyl alcohol) |
| - triacetate/ some other fibres or polylactide | Method 6 (with dichloromethane) |
| - some cellulose fibres/ some other fibres | Method 7 (with sulphuric acid) |
| - acrylics, some modacrylics, some chlorofibres/ some other fibres | Method 8 (with dimethylformamide) |
| - acetate/ some other fibres | Method 10 (with acetic acid) |
| - silk/ some other fibres | Method 11 (with sulphuric acid) |
| - chlorofibres/ some other fibres | Method 14 ( with concentrated sulfuric acid) |
| RLNTP**:2006 Appendix №6; Methods based on Annex №5, section II | |
| - acetate/ some other fibres | BDS EN ISO 1833-3 (with acetone) |
| - protein/ some other fibres | BDS EN ISO 1833-4(with hypochlorite) |
| - viscose, cupro, some modal or lyocell / some other fibres | BDS EN ISO 1833-6(with formic acid and zinc chloride) |
| - polyamide fibres/ some other fibres | BDS EN ISO 1833-7(with formic acid) |
| - acetate/ triacetate fibres | BDS EN ISO 1833-8 (with acetone) |
| - triacetate or polylactide fibres/ some other fibres | BDS EN ISO 1833-10(with dichloromethane) |
| - cellulose fibres/ some other fibres | BDS EN ISO 1833-11 (with sulphuric acid) |
| - acrylics, modacrylics, chlorofibres, elastane/ some other fibres | BDS EN ISO 1833-12 (with dimethylformamide) |
| - acetate fibres/ some other fibres | BDS EN ISO 1833-14 (with acetic acid) |
| - silk/ some other protein fibres | BDS EN ISO 1833-18(with sulphuric acid) |
| - chlorofibres/ some other fibres | BDS EN ISO 1833-17 (with sulphuric acid) |
| - three- component fibre mixtures | BDS EN ISO 1833-2 |
| - manual separation of fibres of different types | BDS EN ISO 1833-1 |
| Regulation (EU) No 1007 Annex VIII, Chapter 2 | |
| - acetate/ some other fibres | Method 1 (with acetone) |
| - some protein/ some other fibres | Method 2 (with hypochlorite) |
| - viscose, cupro, some modal / some other fibres | Method 3 (with formic acid and zinc chloride) |
| - polyamide, nylon/ some other fibres | Method 4 (with formic acid) |
| - acetate/ some other fibres | Method 5 (with benzyl alcohol) |
| - triacetate or polylactide/ some other fibres | Method 6 (with dichloromethane) |
| - some cellulose fibres/ some other fibres | Method 7 (with sulphuric acid) |
| - acrylics, some modacrylics, some chlorofibres/ some other fibres | Method 8 (with dimethylformamide) |
| - acetate/ some other fibres | Method 10 (with acetic acid) |
| - silk/ some other fibres | Method 11 (with sulphuric acid) |
| - certain fibres and chlorofibres, elastolefin or melamine/ some other fibres | Method 14 ( with concentrated sulfuric acid) |
| manual separation | |
| - three- component fibre mixtures | Regulation (EU) No 1007 Annex VIII, Chapter 3 |
|
1.2.2 Hygroscopicity/ Moisture exchange |
BDS 12006 |
| 1.2.3 pH of aqueous extract | BDS EN ISO 3071 |
| 1.2.4 Dimensional changes in wetting in cold water- length and/or width |
BDS ISO 7771 |
|
1.2.5.1 Dimensional changes after wet treatment with automatic washing machine - length and/or width |
BDS 9425, amendments 1, 2 and 3 |
| 1.2.5.2 Dimensional changes after wet treatment by hand washing - length and/or width |
BDS 9425- table 2, wet treatment mode P2 and P3 |
| 1.2.6 Dimensional change of washing and drying – length/width |
BDS EN ISO 5077 |
|
1.2.7 Free and hydrolysed formaldehyde |
BDS EN ISO 14184-1 |
| 1.2.8 Released formaldehyde | BDS EN ISO 14184-2 |
| 1.2.9 Maximum tensile strength of the seam - Strip method | BDS EN ISO 13935-1 |
|
1.2.10 Length |
BDS EN 1773 |
|
1.2.11 Width |
BDS EN 1773 |
| 1.2.12 Mass per unit area | BDS EN 12127 |
|
1.2.13 Ignition time of vertically oriented specimens (surface/ bottom ignition) - length and/or width: |
BDS EN 1101/А1 |
|
1.2.14.1 Flame spread of vertically oriented specimens( surface/ bottom ignition)- length and/or width: |
BDS EN 1102 |
|
1.2.15.1 Flame spread of vertically oriented specimens( surface/ bottom ignition)- length and/or width: |
BDS EN 1103 |
|
1.2.16 Ignition time of vertically oriented specimens (surface/ bottom ignition) - length and/or width: |
BDS EN 1625 |
| 1.2.17 Average ignition time of vertically oriented specimens (surface/ bottom ignition) - length and/or width | BDS EN ISO 6940 |
|
1.2.18 Flame spread of vertically oriented specimens( surface/ bottom ignition)- length and/or width: |
BDS EN ISO 6941 |
|
1.2.19.1 Flame resistance time of vertically oriented specimens (surface/ bottom ignition) - length and/or width (surface/ bottom ignition) - length and/or width |
BDS EN ISO 15025 |
|
1.2.20.1 Маss оf а раir оf sосks. |
BDS 5512, item 2.1 |
|
1.2.20.2 Linеаr dimеnsiоns |
BDS 5512, item 2.2 |
| 1.2.20.3 Dimеnsiоnal сhаngе аftеr wаshing | BDS 5512, item 2.8 |
| 1.2.21.1 Теаr strеngth оf thе sеаm in dirесtiоn: реrреndiсulаr tо thе sеаm/ in the dirесtiоn оf thе sеаm |
BDS 13307, item 3.2 |
|
1.2.21.2 Elasticity to break in the direction of the seam. |
BDS 13307, item 3.2 |
| 1.2.21.3 Density of the seam |
BDS 13307, item 3.1 |
|
1.2.21.4 Width of the seam |
BDS 13307, item 3.1 |
| 1.2.21.5 Hidden cut | BDS 13307, item 3.3 |
| 1.2.22 Strength to ball puncturing | BDS 9585 |
| 1.2.23 Lаddеrs реr unit lеngth аnd unit аrеа. | BDS EN 14971 |
| 1.2.24 Surface fuzzing and pilling | BDS EN ISO 12945-1 BDS EN ISO 12945-2 |
| 1.2.25 Abrasion resistance -Martindale method. Specimen breakdown | BDS EN ISO 12947-2 |
| 1.2.26 Abrasion resistance - Martindale method . Mass loss reduction |
BDS EN ISO 12947-3 |
| 1.2.27 Abrasion resistance -Martindale method. Appearance change |
BDS EN ISO 12947-4 |
| 1.2.28 Air permeability | BDS EN ISO 9237 |
| 1.2.29 Materials soluble in organic solvents, natural, resulting from the production of synthetic fibres or applied during the processing stage | DIN 54278-1 |
| 1.2.30 Dimensions of clothing | BDS EN ISO 8559-1 BDS EN ISO 8559-2 BDS EN 13402-3 |
| 1.2.31 Dimensional characteristics of knitted garments | BDS 15409 |
| 1.2.32 Thermal resistance under steady-state conditions, Rct 1.2.33 Water-vapour resistance under steady-state conditions , Ret 1.2.34 Water-vapour permeability index |
BDS EN ISO 11092 |
| 1.2.35 Surface resistivity | BDS EN 1149-1 |
| 1.2.36 Electrical resistance through a material (vertical resistance), Rv | BDS EN 1149-2 |
| 1.2.37 Abrasion resistance | BDS EN 530 |
| 1.2.38 Appearance of finished textiles after home washing and drying | BDS EN ISO 15487- т.7.4;7.5;7.6;7.8;7.9 |
| 1.2.39 Delamination resistance to repeated washing and drying | ILM 01 |