I. TEXTILES AND CLOTHING - PHYSICAL AND PHYSICOCHEMICAL TESTS
1.1. Woven fabrics (from natural, synthetic fabrics and blends with them, articles made from them used for living, technical purposes and garment)
| 1.1.1 Quantitative analysis : | RLNTP**:2006 Appendix №5, section II; |
| - acetate/ some other fibres | Method 1 (with acetone) |
| - some protein/ some other fibres | Method 2 (with hypochlorite) |
| - viscose, cupro, some modal/ some other fibres | Method 3 (with formic acid and zinc chloride) |
| - polyamide, nylon/ some other fibres | Method 4 (with formic acid) |
| - acetate/ some other fibres | Method 5 (with benzyl alcohol) |
| - triacetate/ some other fibres or polylactide | Method 6 (with dichloromethane) |
| - some cellulose fibres/ some other fibres | Method 7 (with sulphuric acid) |
| - acrylics, some modacrylics, some chlorofibres/ some other fibres | Method 8 (with dimethylformamide) |
| - acetate/ some other fibres | Method 10 (with acetic acid) |
| - silk/ some other fibres | Method 11 (with sulphuric acid) |
| - chlorofibres/ some other fibres | Method 14 ( with concentrated sulfuric acid) |
| RLNTP**:2006 Appendix №6; Methods based on Annex №5, section II | |
| - acetate/ some other fibres | BDS EN ISO 1833-3 (with acetone) |
| - protein/ some other fibres | BDS EN ISO 1833-4(with hypochlorite) |
| - viscose, cupro, some modal or lyocell / some other fibres | BDS EN ISO 1833-6(with formic acid and zinc chloride) |
| - polyamide fibres/ some other fibres | BDS EN ISO 1833-7(with formic acid) |
| - acetate/ triacetate fibres | BDS EN ISO 1833-8 (with acetone) |
| - triacetate or polylactide fibres/ some other fibres | BDS EN ISO 1833-10(with dichloromethane) |
| - cellulose fibres/ some other fibres | BDS EN ISO 1833-11 (with sulphuric acid) |
| - acrylics, modacrylics, chlorofibres, elastane/ some other fibres | BDS EN ISO 1833-12 (with dimethylformamide) |
| - acetate fibres/ some other fibres | BDS EN ISO 1833-14 (with acetic acid) |
| - silk/ some other protein fibres | BDS EN ISO 1833-18(with sulphuric acid) |
| - chlorofibres/ some other fibres | BDS EN ISO 1833-17 (with sulphuric acid) |
| - three- component fibre mixtures | BDS EN ISO 1833-2 |
| - manual separation of fibres of different types | BDS EN ISO 1833-1 |
| Regulation (EU) No 1007 Annex VIII, Chapter 2 | |
| - acetate/ some other fibres | Method 1 (with acetone) |
| - some protein/ some other fibres | Method 2 (with hypochlorite) |
| - viscose, cupro, some modal / some other fibres | Method 3 (with formic acid and zinc chloride) |
| - polyamide, nylon/ some other fibres | Method 4 (with formic acid) |
| - acetate/ some other fibres | Method 5 (with benzyl alcohol) |
| - triacetate or polylactide/ some other fibres | Method 6 (with dichloromethane) |
| - some cellulose fibres/ some other fibres | Method 7 (with sulphuric acid) |
| - acrylics, some modacrylics, some chlorofibres/ some other fibres | Method 8 (with dimethylformamide) |
| - acetate/ some other fibres | Method 10 (with acetic acid) |
| - silk/ some other fibres | Method 11 (with sulphuric acid) |
| - certain fibres and chlorofibres, elastolefin or melamine/ some other fibres | Method 14 (with concentrated sulfuric acid) |
| - manual separation | |
| - three- component fibre mixtures | Regulation (EU) No 1007 Annex VIII, Chapter 3 |
|
1.1.2 Hygroscopicity (moisture exchange) |
BDS 12006 |
| 1.1.3 pH of aqueous extract | BDS EN ISO 3071 |
| 1.1.4 Dimensional changes in wetting in cold water- length and/or width | BDS ISO 7771; BDS EN ISO 3759 |
|
1.1.5.1 Dimensional changes after wet treatment with automatic washing machine - length and/or width |
BDS 9425, amendments 1, 2 and 3 |
| 1.1.5.2 Dimensional changes after wet treatment by hand washing - length and/or width |
BDS 9425- table 2, wet treatment mode P2 and P3 |
| 1.1.6 Dimensional changes of fabrics in wetting (floor covering)- length and/or width | BDS 12823 |
| 1.1.7 Dimensional change of washing and drying –warp/weft | BDS EN ISO 5077 BDS EN ISO 3759 BDS EN ISO 6330 |
|
1.1.8 Free and hydrolysed formaldehyde |
BDS EN ISO 14184-1 |
| 1.1.9 Released formaldehyde | BDS EN ISO 14184-2 |
| 1.1.10 Maximum tensile strength of the seam - Strip method – warp-weft |
BDS EN ISO 13935-1 |
|
1.1.11 Length 1.1.12 Width |
BDS EN 1773 BDS EN 1773 |
| 1.1.13 Mass per unit area | BDS EN 12127 |
| 1.1.14 Total mass per unit area (coated fabrics) |
BDS EN ISO 2286-2, method А |
| 1.1.15 Ignition time of vertically oriented specimens (surface/ bottom ignition) - length and/or width: - minimal - mean |
BDS EN 1101/А1 |
|
1.1.16.1 Flame spread of vertically oriented specimens ( surface/ bottom ignition)- length and/or width: |
BDS EN 1102 |
| 1.1.17 Speed of fire propagation of vertically oriented specimens (surface/ bottom ignition) -length and/or width |
BDS EN 1102 |
|
1.1.18.1 Flame spread of vertically oriented specimens( surface/ bottom ignition)- length and/or width: |
BDS EN 1103 |
|
1.1.19 Ignition time of vertically oriented specimens (surface/ bottom ignition) - length and/or width: |
BDS EN 1625 |
| 1.1.20 Average ignition time of vertically oriented specimens (surface/ bottom ignition) - length and/or width | BDS EN ISO 6940 |
|
1.1.21 Flame spread of vertically oriented specimens( surface/ bottom ignition)- length and/or width: |
BDS EN ISO 6941 |
|
1.1.22.1 Flame resistance time of vertically oriented specimens |
BDS EN ISO 15025 |
| 1.1.23 Oil repulsion rate | BDS EN ISO 14419 |
|
1.1.24 Strength to ball puncturing |
BDS 9585 |
| 1.1.25 Maximum force - Strip method-warp/weft | BDS EN ISO 13934-1 |
|
1.1.26 Tensile elongation - Strip method-warp/weft |
BDS EN ISO 13934-1 |
| 1.1.27 Weaves- plain, twill, satin | BDS 12674 |
|
1.1.28 Tearing force (trouser-shaped test specimens)-warp/weft |
BDS EN ISO 13937-2 |
|
1.1.29 Tearing force (wing-shaped test specimens) -warp/weft |
BDS EN ISO 13937-3 |
| 1.1.30 Tearing force (tongue-shaped test specimens)-warp/weft | BDS EN ISO 13937-4 |
|
1.1.31 Threads per unit length - warp/weft |
BDS ЕN 1049-2, method А and method В |
|
1.1.32 Angle of recovery from creasing: |
BDS EN ISO 2313-1 |
| 1.1.33 Capillarity– warp/ weft | BDS 10298 |
| 1.1.34 Resistance to water penetration |
BDS EN ISO 811 |
| 1.1.35 Air permeability | BDS EN ISO 9237 |
|
1.1.36 Thermal resistance under steady-state conditions , Rct |
BDS EN ISO 11092 |
|
1.1.37 Water-vapour resistance under steady-state conditions , Ret |
BDS EN ISO 11092 |
|
1.1.38 Surface fuzzing and pilling |
BDS EN ISO 12945-1 BDS EN ISO 12945-2 |
| 1.1.39 Abrasion resistance -Martindale method. Specimen breakdown |
BDS EN ISO 12947-2 |
| 1.1.40 Abrasion resistance - Martindale method . Mass loss reduction | BDS EN ISO 12947-3 |
| 1.1.41 Abrasion resistance -Martindale method. Appearance change |
BDS EN ISO 12947-4 |
|
1.1.42 Water-repellence by the Bundesmann rain shower test |
BDS EN 29865 |
|
1.1.43 Water absorption by the Bundesmann rain shower test |
BDS EN 29865 |
|
1.1.44 Water passage by the Bundesmann rain shower test |
BDS EN 29865 |
| 1.1.45 Resistance to surface wetting (spray test) | BDS EN ISO 4920 |
| 1.1.46 Strength of detachment | BDS 12469 |
|
1.1.47.1 Acid permeability before and after 3 washes |
BDS 11665 Т 4.2; 5.2 |
|
1.1.47.2 Alkaline permeability before and after 3 washes |
BDS 11665 Т 4.2; 5.2 |
|
1.1.47.3 Acid resistance before and after 3 washes-% strength reduction |
BDS 11665 Т 4.2; 5.1 |
|
1.1.47.4 Alkaline resistance before and after 3 washes - % strength reduction |
BDS 11665 Т 4.2; 5.1 |
| 1.1.47.5 -% permeability reduction after 3 washes | BDS 11665 Т 5.2 |
| 1.1.48 Materials soluble in organic solvents, natural, resulting from the production of synthetic fibres or applied during the processing stage | DIN 54278-1 |
| 1.1.49. Surface resistivity | BDS EN 1149-1 |
|
1.1.50. Electrical resistance through a material (vertical resistance),Rv |
BDS EN 1149-2 |
| 1.1.51. Evaluation of the wrinkle recovery of fabrics. Appearance method | ISO 9867 |
| 1.1.52. Assessing the smoothness appearance of fabrics after cleansing (washing and drying) - visual |
ISO 7768; BDS EN ISO 6330 |
| 1.1.53 Assessing the smoothness appearance of seams after cleansing (washing and drying) - visual |
ISO 7770; BDS EN ISO 6330 |
| 1.1.54 Dimensions of clothing | BDS EN ISO 8559-1 BDS EN ISO 8559-2 BDS EN 13402-3 |
| 1.1.55 Tear force using ballistic pendulum method (Elmendorf) – warp/ weft | BDS EN ISO 13937-1/AC |
| 1.1.56 Tear resistance of coated fabrics – at constant rate - warp/ weft | BDS EN ISO 4674-1 method A, method B |
| 1.1.57 Tear resistance of coated fabrics – ballistic pendulum method - warp/ weft | BDS EN ISO 4674-2 |
| 1.1.58 Tensile strength at break of coated fabrics – warp/ weft | BDS EN ISO 1421 method 1 |
| 1.1.59 Elongation at break of coated fabrics – warp/ weft | BDS EN ISO 1421 method 1 |
| 1.1.60 Abrasion resistance | BDS EN 530 |
| 1.1.61 Appearance of finished textiles after home washing and drying | BDS EN ISO 15487 - T.7.4; 7.5; 7.6; 7.8; 7.9 |